Tag Archives: Technosoft

Technosoft iPOS3602 and iPOS3604 Intelligent Servo Drives

Technosoft introduced the iPOS3602 and iPOS3604 intelligent servo drives. The new iPOS line integrates all the basic motor control functions, motion control and PLC features on a small plug-in module. The iPOS drive can control any rotary or linear brushless, DC brush or step motor. The motion capabilities of the iPOS cards include position or speed profiles (trapezoidal, S-curve), 3third order PVT and first order PT interpolation, electronic gearing and camming, and analog or digital external reference. The Technosoft intelligent servo drives also feature cyclic synchronous position, speed and torque modes specific to EtherCAT.

Continue reading

Technosoft IDM680 Intelligent Servo Drive with EtherCAT

The Technosoft IDM680 is an intelligent servo drive. The IDM680 features EtherCAT communication interface, embedded motion controller, and sensors for digital and linear Halls, SSI, EnDAT, BiSS, sine/cosine incremental encoders and resolver. IDM680 can operate either as a standard EtherCAT slave using a CANopen over EtherCAT (CoE) protocol, or it can be programmed to execute complex motion programs directly at drive level, using the built-in motion controller and the EasyMotion Studio platform. IDM680 with EtherCAT is ideal for motion control applications that require high data transfer rates, short data processing times and high synchronicity with low jitter (such as plant or building automation industries).

Continue reading

Technosoft ISD860 Intelligent Servo Drive

The Technosoft ISD860 intelligent servo drive for motion applications that need cost-optimized design, embedded intelligence, networking, and high servo performance control. It features MotionChip DSP technology. The ISD860 controls brushless, DC or linear motors up to 860 W continuous / 2.2 kW peak voltage. ISD860 works in single-axis, multi-axis or stand alone configurations. The embedded Technosoft Motion Language includes a high-level command protocol, which can be used by the host through the on-board RS232 / CAN serial interfaces.

Continue reading

Technosoft TMC-3D Multi-Axis Motion Controller Supports G-code

Technosoft has adapted the TMC-3D multi-axis motion controllerfor G-code commands. The G-code information is translated into TML commands through the G-code to TML converter integrated in the EasyMotion Studio software. The G-code files are imported into EasyMotion Studio and translated to TML commands. After the conversion process, TMC-3D will send the motion sequences to the drives / motors which execute the movements. The TML converter enables developers to set the basic movement parameters specific to the G-code: linear axes, cycle start button, choose the measure units, set the Traverse and Feed rates. Technosoft’s G-code-to-TML converter supports various G-code words, letters and parameters together with unary and binary operands.

Continue reading