Digi International introduced the rugged ConnectPort X3 H programmable cellular gateway for monitoring remote assets in harsh environments. The Digi ConnectPort X3 H features a NEMA 4X/IP66 enclosure to protect the gateway from water, dust and dirt. The ConnectPort X3 H provides global connectivity to remote devices and device/sensor networks via GSM GPRS cellular networks. It is ideal for tank monitoring, pipeline, agriculture, utility and other rugged applications. The ConnectPort X3 H is shipped iDigi ready and is available in limited quantities for $438 MSR. It is certified by AT&T and works on virtually any GSM network around the world.
The WireX converter, from eDevice, enables legacy equipment with embedded analog modems to immediately be switched from connecting through the traditional phone line to connecting through a cellular GSM / GPRS wireless network. WireX is the first Analog-To-Wireless converter designed for self installation by the end-user. It does not require any changes on the existing legacy device, the user only needs to disconnect the phone cable from the wall and plug it into the WireX dial-up connector. The data previously transferred over the phone link is then automatically transmitted using phone line emulation over a GPRS or GSM data cellular network. WireX is ideal for remote patient monitors, telecardiology monitors, alarm and security systems, TV set-top-boxes, point-of-sale equipment, energy metering systems, security, and access control devices.
The AXIOMTEK NA-811C is a 19″ 1U rackmount network appliance platform. It is configured with an ultra low power Intel Celeron M / Pentium M processor with the Mobile Intel 915GME chipset. The NA-811C network appliance supports two DDR2 SODIMM slots with 400/533 memory up to 2GB capacity. The NA-811C is an ideal network appliance solution for small to medium businesses who are seeking performance, cost-effective, power and energy saving in a wire closet. The energy-saving network security appliance is available now.