Extreme Engineering Solutions announced the XPand6103 Embedded Box PC. The fanless embedded system features the Intel Core i7 processor. The X-ES XPand6103 Embedded Box PC is ideal for Industrial PC (IPC), vehicle, and rail transportation applications, and provides an optimal solution for demanding autonomous vehicle computing requirements.
Extreme Engineering Solutions (X-ES) rolled out the XPand6104 embedded system. The Small Form Factor system supports dual- and quad-core 2nd and 3rd generation Intel Core i7 processors with up to 16 GB of DDR3-1333 memory. With commercial connectors, the XPand6104 SFF system can be utilized as an XPedite7450 COM Express development platform, a deployable SFF system, or a demo platform for applications requiring a high-performance Intel Core i7 processor solution.
Extreme Engineering Solutions introduced the XPedite5650 Mini COM Express module. The X-ES XPedite5650 board features the Freescale QorIQ P2041 quad-core processor, up to 4 GB of DDR3-1333 ECC SDRAM, one x2 and two x1 PCI Express interfaces, two Gigabit Ethernet ports (one 1000BASE-T and one 1000BASE-X), two serial ports, two USB 2.0 ports, and two SATA 3.0 Gb/s ports. The XPedite5650 COM Express module is ideal for industrial, communications, and military applications where Size, Weight, and Power (SWaP) are critical.
Extreme Engineering Solutions announced the XCalibur4402 single board computer. The 6U CompactPCI SBC supports the third generation Intel Core i7 processor. It features up to 16 GB of DDR3-1600 ECC SDRAM in two channels, two PrPMC/PrXMC slots, 32 MB of NOR flash, up to 128 GB of NAND flash, Gigabit Ethernet, SATA, I2C, USB, PMC I/O, XMC I/O, and DisplayPort. The X-ES XCalibur4402 SBC is ideal for military, communications, and industrial applications. Conduction- or air-cooled versions are available.
Extreme Engineering Solutions introduced their XPedite5401 conduction-cooled PrPMC/XMC module. The X-ES XPedite5401 supports the Freescale QorIQ P3, P4, and P5 processor families. The module features two channels of DDR3-1333 ECC SDRAM, up to 8 GB (4 GB each), up to 16 GB of user flash and 256 MB of boot flash (with redundancy), two Gigabit Ethernet ports, a x4 PCI Express interface to P15, and two SATA 3.0 Gb/s ports to P16. The XPedite5401 is available now.
Extreme Engineering Solutions launched the XPedite7431 Single Board Computer. The X-ES 3U CompactPCI SBC supports 2nd and 3rd generation Intel Core i7 processors. The X-ES XPedite7431 features up to 8 GB of memory, 32 MB of NOR boot flash, up to 16 GB of NAND flash, two 10/100/1000BASE-T Ethernet ports, HDMI/DVI-D video port, and a USB 2.0 port. X-ES XPedite7431 SBC is ideal for air-cooled industrial and communications applications, and conduction-cooled military applications.
Extreme Engineering Solutions launched their XCalibur1600 6U CompactPCI Single Board Computer. The X-ES SBC supports the Freescale QorIQ P3, P4, and P5 processors. It features up eight e500mc cores running at up to 1.5 GHz and dual-channel DDR3 memory. The single board computer supports Wind River VxWorks, Linux, and Green Hills INTEGRITY. The X-ES XCalibur1600 SBC is ideal for embedded computing applications.
Extreme Engineering Solutions (X-ES) introduced the XPedite5205 Embedded Services Router. The PMC/XMC module features Cisco IOS IP Routing software. The XPedite5205 ESR provides mobile, ad hoc networking for military and emergency response. The XPedite5205 can be retrofitted for use in any available PMC or XMC site. It is ideal for oil and gas, mining, smart grid, transportation, and public safety applications.
Extreme Engineering Solutions launched the XPedite7450 COM Express module. The X-ES XPedite7450 is based on the 3rd generation Intel Core i7 quad-core processor. The rugged board features up to 16 GB of DDR3-1333/DRR3-1600 ECC SDRAM, an integrated high-performance 3D graphics controller, enhanced Type 6 pinout, five Gen2 PCI Express ports, four USB 2.0 high-speed ports, six SATA 3.0 Gb/s ports, and an Intel High Definition Audio port. The XPedite7450 will be available in July 2012. It is ideal for harsh military, aerospace, and industrial environments.
Extreme Engineering Solutions introduced their XPedite5600 PrPMC/XMC module. The XPedite5600 features the Freescale P2040 or P2041 processor, up to 8 GB of DDR3-1333 ECC SDRAM, and either a x4 PCI Express Gen2 XMC interface or 32-bit PCI PMC interface. The air-cooled X-ES XPedite5600 board is available now. It is ideal for industrial and communications applications that require a high-performance PowerPC processor on an industry standard mezzanine module.