Tag Archives: Embest

Embest Introduces SBC8600B Single Board Computer

Embest SBC8600B single board computer

Embest introduced the SBC8600B single board computer. The SBC8600B SBC is based on the Texas Instruments 720MHz Sitara AM3359 ARM Cortex-A8 processor. The board is powered by a tiny core board Mini8600B, which has integrated AM3359 processor, DDR3, and Nand Flash. The SBC8600B single board computer supports Linux 3.2.0, Android 2.3 and WinCE 7 BSP. A DVD with the software driver source code and relative documents to help customer better understand this board and start their reference design is included with the board.

Continue reading

Embest Introduces SBC8118 Single Board Computer

Embest SBC8118 Single Board Computer

Embest introduced the SBC8118 Single Board Computer. The industrial grade SBC is based on TI’s AM1808 ARM9 processor. It features 128MB Mobile DDR2, 128MB Nand Flash, 8-Mbit SPI Flash on board, SATA interface, SD card interface, four USB hosts, Ethernet, LCD/Touch screen, Buzzer, Camera and supports RS485 networking. The Embest SBC8118 Single Board Computer is ideal for medical, industrial automation, control, communication, and applications.

Continue reading

Embest MBC-SAM9G45 Core Board

The Embest MBC-SAM9G45 is an ARM9 module board built with the ATMEL AT91SAM9G45 embedded microprocessor. The Embest MBC-SAM9G45 features 4MB DataFlash, 256MB NandFlash, 64KB EEPROM, and 128MB DDR2 SDRAM. The board provides a wide range of peripherals, including a high-speed USB host/device port, an Ethernet 10/100 interface, two high-speed SD/MMC slots and a QVGA 320×240 LCD panel with Resistive touch screen. It measuring only 45mm x 52mm and supports Linux 2.6 and WinCE 6.0.

Continue reading

Embest STM32F107 ARM Cortex-M3 Board

The Embest STM32F107 ARM Cortex-M3 board features the STMicroelectronic ARM Cortex-M3 core based STM32F107VC microcontroller. The STM32F107 board includes a 2.4 inch TFT LCD touch screen panel (320×240), mini USB supporting USB OTG , 10/100Mb Ethernet, Micro SD Card, TFT-LCD, ADC, DAC, SPI, IIC, RS232 (DB9), two CAN, speaker, earphone, five-position Joystick, and Reset button. The board enables engineers to evaluate the full features of the STM32F107VC processor and accelerate to design.

Continue reading

Embest SAM9G45 ARM9 Board

The Embest SAM9G45 ARM9 Board is a full-featured evaluation board based on the ATMEL AT91SAM9G45 processor. The SAM9G45 board features USB host, USB device, 10/100Mb Ethernet, SD/MMC, Micro SD, TFT LCD, User extension interfaces, four key buttons, and IIS Audio Input/Output Jack. The board supports Linux, WinCE and Android OS.

Continue reading

Embest AT91SAM3U ARM Cortex-M3 Board

The Embest AT91SAM3U ARM Cortex-M3 Board is an ARM embedded evaluation board. It integrates the ATMEL AT91SAM3U4E Cortex-M3 core-based processor, which operates at a maximum speed of 96 MHz and features 256 Kbytes of Flash and 48 Kbytes of SRAM. The Embest AT91SAM3U features high speed USB 2.0 (480MHz), audio I/O port, SD card interface, and TFT LCD interface. The Embest AT91SAM3U ARM Cortex-m3 Board is available now and for $187 (US).

Continue reading

Embest SBC6300X Single Board Computer

The Embest SBC6300X is a single board computer (SBC) based on an Atmel AT91SAM9263 MCU with 32-bit ARM instruction set and complete embedded software environment. It has a Mini6300 controller board mounted directly on an expansion board through two 0.8mm 100pin Free Height (FH) surface-mount connectors. The SBC6300X supports extended temperature operation and comes pre-loded with a Linux 2.6-based kernel, YAFFS filesystem, and Wince6.0 BSP. The arm development board operates from -10 to 70 degrees Celsius (without backup battery).

Continue reading