Tag Archives: AT91SAM9G45

Artila Electronics Introduces M-606 Single Board Computer

Artila Electronics M-606 single board computer

Artila Electronics introduced their M-606 single board computer. The M-606 SBC features a 400MHz Atmel AT91SAM9G45 ARM9 processor, 128MB DDR2 RAM, 128MB NAND Flash, 2MB DataFlash, 10/100Mbps Ethernet, four USB 2.0 hosts, three RS-232 ports, RS-422/485 port, audio, microSD socket and LCD TTL/LVDS interface. The Artila M-606 single board computer is ideal for mission-critical industrial applications where HMI (Human Machine Interface) is necessary.

Continue reading

Ronetix SK-PM9G45 Starter Kit

Ronetix introduced their SK-PM9G45 Starter Kit. The SK-PM9G45 is based on the Atmel’s 400MHz, ARM926-based AT91SAM9G45 microcontroller (MCU). The starter kit includes a PM9G45 CPU module, baseboard and 7-inch LCD 800×480 with touchscreen and LED backlight. The Ronetix SK-PM9G45 starter kit supports Linux, WinCE and Android OS. The PM9G45 CPU module features 128MiB DDR2, 256MiB Flash and 8MiB Atmel Serial DataFlash option.

Continue reading

Ronetix PM9G45 CPU Module

Ronetix introduced the PM9G45 computer-on-module. The SODIMM-sized CPU module features the Atmel’s ARM926-based AT91SAM9G45 system-on-chip (SoC), 128MB DDR2, 256MB NAND Flash, 10/100Mbps Ethernet MAC controller, USB Host and On-The-Go ports, four USART interfaces, dual high-speed multi media card interfaces. The PM9G45 have a touch screen controller and a LCD controller that supports resolutions up to 800×600 pixels. The SODIMM-sized board measures only 2.6 by 1.3 inches (67x35mm). The Ronetix PM9G45 is ideal for industrial control systems, data loggers, point-of-sale (PoS) terminals, alarm systems, medical equipment and other embedded systems. The Ronetix PM9G45 CPU module is available now.

Continue reading

Embest MBC-SAM9G45 Core Board

The Embest MBC-SAM9G45 is an ARM9 module board built with the ATMEL AT91SAM9G45 embedded microprocessor. The Embest MBC-SAM9G45 features 4MB DataFlash, 256MB NandFlash, 64KB EEPROM, and 128MB DDR2 SDRAM. The board provides a wide range of peripherals, including a high-speed USB host/device port, an Ethernet 10/100 interface, two high-speed SD/MMC slots and a QVGA 320×240 LCD panel with Resistive touch screen. It measuring only 45mm x 52mm and supports Linux 2.6 and WinCE 6.0.

Continue reading

Embest SAM9G45 ARM9 Board

The Embest SAM9G45 ARM9 Board is a full-featured evaluation board based on the ATMEL AT91SAM9G45 processor. The SAM9G45 board features USB host, USB device, 10/100Mb Ethernet, SD/MMC, Micro SD, TFT LCD, User extension interfaces, four key buttons, and IIS Audio Input/Output Jack. The board supports Linux, WinCE and Android OS.

Continue reading