ADLINK Technology introduced the AMP-204C and AMP-208C digital signal processing (DSP)-based 4/8-axis pulse-train motion controllers. The AMP-204C/208C boards feature advanced synchronous motion control performance combined with point-table functionality integrating multi-dimensional interpolation. The AMP-204C and AMP-208C enable high pulse output and encoder input frequency up to 6.5 MHz and 20 MHz, respectively. The AMP-204C/AMP-208C is available now.
ADLINK Technology introduced the PXIe-9529 dynamic signal acquisition module. The PXI Express card features up to eight 24-bit analog input channels simultaneously sampling at 192 kS/s and a 108 dB dynamic range to provide ample power for high density, high channel count signal measurement. The PXIe-9529′s 8-channel design provides easy expansion up to 136 channels in a single 18-slot PXI Express chassis while still maintaining tight timing and synchronization between channels. It is ideal for high channel count applications like phased array data acquisition.
ADLINK Technology launched the PCIe-7360 32-CH High-Speed Digital I/O Card. The PCIe-7360 features up to 100 MHz data rate, 400 MB/s throughput, parallel and bi-directional 32-channel high-speed I/O lines and 8-channel application function I/Os. The board is ideal for image performance verification, ADC/DAC testing, digital image transfer to large-scale printer/plotter applications, and digital video recording/playback.
ADLINK Technology introduced the Express-HL COM Express Extreme Rugged Type 6 Module. The Express-HL supports the fourth generation Intel Core 2- and 4-core mobile processors (i7/i5). It features the Mobile Intel QM87 Express Chipset and up to 16GB dual channel DDR3L SDRAM at 1600 MHz system memory. The board is ideal for retail, medicine, gaming, transportation, defense, communications, and industrial automation applications.
ADLINK Technology introduced the CoreModule1-86DX2 single board computer. The PC/104 SBC two Ethernet ports, four serial ports, three USB ports, eight A/D inputs, eight GPIOs, and PS/2 connectors for keyboard and mouse. The CoreModule1-86DX2 is ideal for control applications that require power efficiency, small form factor design, longevity, and industrial grade ruggedness.
ADLINK Technology launched their PCIe-2602 SDI video/audio capture card. The PCIe-2602 features the PCI Express x4 interface, 2-channel acquisition of 3G-SDI for low latency and uncompressed video data signals up to 1920x1080p/60fps, lossless full color 4:4:4 video and up to 12-bit video data. The board is ideal for critical applications like medical imaging, intelligent video surveillance and analytics, and broadcasting.
ADLINK Technology introduced the PXI-3980 embedded controller. The PXI-3980 is ADLINK’s first quad-core PXI embedded controller. It features the Intel Core i7-2715QE 2.1 GHz processor, up to 16 GB of 1333 MHz DDR3 memory, and dual BIOS backup. The ADLINK PXI-3980 embedded controller is ideal for applications requiring intensive data analysis or processing.
ADLINK Technology introduced the EOS-1220 GigE Vision-compliant embedded vision system. The EOS-1220 features the 3rd generation Intel Core i7 quad-core processors, four independent PoE (power over Ethernet) ports, four RS-232/422/485 ports, two USB 3.0 ports, 32 PNP/NPN isolation digital I/Os, dual storage (two SATA interface and one CFAST slot), an internal USB port, and 1 kbit programmable EEPROM.
ADLINK Technology introduced the CoreModule 920 single board computer. It features Intel Core i7 processor support, up to 4GB of solder-down DDR3 ECC memory, 8 GB of industrial grade SSD and a fast data-transfer SATA 6 Gb/s interface. The ADLINK PC/104 board is ideal for mission-critical applications in space-constrained environments such as transportation, aviation, defense and homeland security.
ADLINK Technology introduced the MXC-6300 embedded system. The embedded computer supports the third generation Intel Core i7/i5/i3 processors and QM77 chipset. The ADLINK MXC-6300 features three PCI/PCIe expansion slots, six USB ports (four USB 3.0 and two USB 2.0), four serial ports, 16-CH digital I/O, and two Gigabit Ethernet ports. The embedded system is ideal for machine vision, factory automation, maritime automation and video surveillance.