Embedded system blog and directory

Share/BookmarkSubscribe
'Boards, Busses' Category Archive

Congatec Conga-QMCB Qseven Mini Carrier Baseboard

Posted by Ken Cheung in Boards, Busses on Friday, December 9, 2011

Congatec introduced the conga-QMCB mini carrier baseboard. The conga-QMCB is designed for space-critical applications based on the Qseven standard. The congatec baseboard features six USB interfaces, Ethernet connection, high definition audio, mini PCI express socket, and 18/24 Bit graphics interfaces for DisplayPort, HDMI and LVDS. The congatec conga-QMCB baseboard is available now. Prices start at [...]

Axiomtek CAPA111 Embedded Single Board Computer

Posted by Ken Cheung in Boards, Busses on Thursday, December 8, 2011

Axiomtek introduced their CAPA111 embedded board. The CAPA111 single board computer is based on the low-power AMD G-Series APU T40R/T40E with the Fusion Controller Hub A50M. The embedded SBC features DDR3 1066 memory slot (up to 4 GB), integrated Radeon HD 6250 graphics controller, DirectX 11 support, 18/24-bit LVDS and VGA display dual view compatibility, [...]

DSM 96M4361o Single Board Computer

Posted by Ken Cheung in Boards, Busses on Wednesday, December 7, 2011

DSM Computer introduced their 96M4361o single board computer. The PICMG 1.3 industrial SBC supports the second generation Intel Core processors. The DSM 6M4361o slot CPU board features the Intel Q67 chipset, two DIMM slots for DDR3 1333/1066 memory modules (up of 8GB), internal DVI-D and 24 bit dual channel LVDS, dual GigaBit LAN interfaces, Mini [...]

ADLINK Express-HRR COM Express Type 6 Computer-on-Module

Posted by Ken Cheung in Boards, Busses on Monday, December 5, 2011

ADLINK Technology introduced the Express-HRR COM Express Type 6 Computer-on-Module. The Ampro by ADLINK Express-HRR is based on the quad/dual-core 2nd Generation Intel Core i7 processor and Mobile Intel QM67 Express Chipset. It features two SODIMM sockets (up to 16GB ECC 1333MHz DDR3 memory), three DDIs for DisplayPort/HDMI/DVI/SDVO, eight PCIe x1 and one PCIe x16 [...]

Datasound Laboratories ICOP-6326 x86 Embedded Controllers

Posted by Ken Cheung in Boards, Busses on Friday, December 2, 2011

Datasound Laboratories launched the DSL ICOP-6326 family of low-power x86 embedded controllers. The ICOP-6326 features 800MHz Vortex86DX CPUs, up to 512MB DDR2 RAM, triple 10/100Mbps LAN, four serial ports, three USB ports, a 16-bit GPIO, CompactFlash socket, LCD / LVDS interfaces, and redundancy capabilities. The embedded controller is ideal for data-acquisition, industrial automation, process control, [...]

Ronetix SAM9-CM Embedded CPU Module

Posted by Ken Cheung in Boards, Busses on Thursday, December 1, 2011

Ronetix introduced the SAM9-CM embedded CPU modules. The new board series feature an Atmel ARM926-based microcontroller, 128MiB DDR2 SDRAM, 256MiB NandFlash, 4MiB SPI Flash, 1024-bit one-wire EEPROM, and optional Ethernet PHY Layer Transceiver. The Ronetix SAM9-CM embedded CPU module is available now. The board is ideal for embedded and industrial applications.

Congatec conga-TM67 COM Express Basic Type 6 Module

Posted by Ken Cheung in Boards, Busses on Tuesday, November 29, 2011

Congatec launched the conga-TM67 COM Express Basic Type 6 module. The conga-TM67 supports the second generation of Intel Core processors. The congatec board features up to 8 GByte dual-channel DDR3 memory, seven PCI Express Lanes, PCI Express Graphics (PEG) x16 Lanes, eight USB 2.0 ports, four SATA interfaces with RAID support, EIDE and 1GB Ethernet [...]

Avalue ECM-A50M Signal Board Computer

Posted by Ken Cheung in Boards, Busses on Monday, November 28, 2011

Avalue Technology introduced their ECM-A50M signal board computer. The 3.5-inch SBC features the AMD eOntario T40E CPU, A50M chipset, 204-pin DDR3 SODIMM (up to 4GB DDR3 1066 SDRAM), two Realtek Gigabit interfaces, mini-PCIe (mSATA supported) expansion slot, two SATA, two COM, seven USB 2.0, LPC, 16-bit GPIO (8-in and 8-out) and 4/5/8-wire built-in touch controller. [...]

Ampro by ADLINK CoreModule 720 and ReadyBoard 910 Single Board Computers

Posted by Ken Cheung in Boards, Busses on Wednesday, November 23, 2011

ADLINK Technology introduced the CoreModule 720 PC/104-Plus Single Board Computer and ReadyBoard 910 EPIC SBC. The Ampro by ADLINK CoreModule 720 is based on the Intel Atom Processor E600 Series, while the Ampro by ADLINK ReadyBoard 910 supports the 2nd Generation Intel Core i7/i5/i3 and Celeron processors. Both single board computers feature onboard Solid State [...]

BCM MX67QM Mini ITX Motherboard

Posted by Ken Cheung in Boards, Busses on Tuesday, November 22, 2011

The MX67QM Mini ITX motherboard, from BCM Advanced Research, features the Intel Mobile QM67 chipset, socket G (supports second generation Intel Core i7/i5/i3 processors), multi-monitor support (HDMI, DVI-D, LVDS and VGA), dual channel DDR3 SO-DIMMs (up to 16 gigabytes to 1066/1333 MHz memory), two SATAIII, two SATAII, eight USB (optional: two USB 3.0), five COM, [...]

If you found this page interesting:
Share/Bookmark

« Newer Posts || Older Posts »

Custom Search

Embedded Star Newsletter
Don't have time to visit Embedded Blog everyday? Then sign up for our free newsletter. We'll send you an email when we have something to share with you. Your email address will be kept confidential and we will not share, sell, or rent it to anyone. You can unsubscribe at any time by clicking a link in the email.

Enter your email address to sign up for our free newsletter:  

If you are familiar with RSS feeds, you can also sign up for our free blog feed. Our RSS feed is updated in real-time while our newsletter is updated daily.