Embedded system blog and directory

Share/BookmarkSubscribe
'Boards, Busses' Category Archive

Acromag IP560 and IOS-560 CAN Bus Modules for Embedded Systems

Posted by Ken Cheung in Boards, Busses,Industrial on Thursday, September 2, 2010

Acromag introduced the IP560 and IOS-560 CAN bus modules for interfacing network sensors and actuators to control systems. The IP560 is an Industry Pack ANSI/VITA-4 card that plugs into VME, CompactPCI, and PCI bus mezzanine carrier cards or single-board computers in embedded systems. IOS-560 is designed for use within Acromag’s I/O Server industrial PC, which [...]

Mistral UART and CAN Daughter Cards for TI Sitara AM1x, OMAP-L1x EVM

Posted by Ken Cheung in Boards, Busses on Monday, August 30, 2010

Mistral introduced UART and CAN daughter cards for Texas Instruments (TI) evaluation modules (EVMs) based on TI’s Sitara AM1x microprocessors (MPUs) and OMAP-L1x application processors for embedded industrial, medical and consumer designs. The UART daughter card has interfaces for soft UART, hard UART, and soft DIR. The CAN daughter card features soft CAN and hard [...]

e-con Systems e-WiB Wi-Fi and Bluetooth Add-on Module

Posted by Ken Cheung in Boards, Busses,Wireless on Monday, August 30, 2010

e-con Systems announced the e-WiB Wi-Fi and Bluetooth module. The e-WiB is based on the Marvell 88W8688 (Marvell 8688), which features 802.11b/g and Bluetooth class 2.1 EDR. The Wi-Fi Bluetooth add-on module is designed as single antenna for WiFi and Bluetooth. e-WiB features SDIO/SPI interface for Wi-Fi and UART/SDIO interface for Bluetooth. The small size [...]

IBASE MI957 Mini-ITX Motherboard

Posted by Ken Cheung in Boards, Busses on Tuesday, August 24, 2010

IBASE Technology introduced the MI957 Mini-ITX motherboard. The MI957 is based on the Intel Core i7-610E processor. The MI957 board features the mobile Intel QM57 Express Chipset, Gigabit Ethernet port, audio, eight USB ports onboard, four COM ports, four SATA II (RAID 0,1) ports, a Mini PCI-E, a PCI-E and a PCI slot. The IBASE [...]

Mercury Ensemble 6000 Series 6U OpenVPX Intel Core i7 LDS6520 Module

Posted by Ken Cheung in Boards, Busses on Tuesday, August 24, 2010

Mercury Computer Systems introduced the Ensemble 6000 Series 6U OpenVPX Intel Core i7 LDS6520 Module. The LDS6520 embedded computing board features the Intel’s Core i7 Arrandale processor family and the POET (Protocol Offload Engine Technology) fabric interconnect. The LDS6520 enables a serial RapidIO or low latency 10 Gigabit Ethernet data plane to connect a number [...]

iWave Systems Technologies iW-RainboW-G9 Module

Posted by Ken Cheung in Boards, Busses on Thursday, August 19, 2010

iWave Systems Technologies rolled out their iW-RainboW-G9 module. The iW-RainboW-G9 features Freescale’s Power Architecture, MPC864x processor, XMC/PrPMC, form factor, four Serial RapidIO / x8 PCI Express switched interconnects, Quad Gigabit Ethernet ports, and low latency. The board is available now. The iW-RainboW-G9 is ideal for embedded networking, routers, switches, industrial control, automation, general computing, embedded [...]

Witech OK6410-CORE ARM11 Development Kit

Posted by Ken Cheung in Boards, Busses on Monday, August 16, 2010

The Witech OK6410 ARM11 development kit features the Samsung S3C6410 microprocessor (clocked to 667MHz), 256MB DDR ram, and 1GB NAND Flash. The OK6410-CORE targets industrial control equipments, vehicle navigation devices, multi-media terminal, and consumer electronic devices. The Witech OK6410 supports Embedded Linux, WindowsCE, Android, VxWorks, and uCos/II. An ARM11 SoM (System on Module) is connected [...]

Selecting the Right Computer on Module Vendor

Posted by Ken Cheung in Articles,Boards, Busses on Monday, August 9, 2010

By Maheshwari Introduction Engineers have always been faced with the question of whether or not a Computer-on-Module (COM) company is the right vendor to partner with. To help with the decision, I have written an article to help engineers select the ideal COM partner. Target Usage First, it is important to identify the applications for [...]

VIA COME8X80 COM Express Module for Embedded Systems

Posted by Ken Cheung in Boards, Busses on Wednesday, August 4, 2010

VIA Technologies introduced the VIA COME8X80 COM Express module for embedded systems. The VIA COME8X80 is a fanless board with a 64-bit VIA Nano E-Series processor (1.3+GHz or 800MHz). The VIA COME8X80 integrates the unified VIA VX800 media system processor. It features VIA Chrome9 integrated graphics; support for VGA and dual channel LVDS displays, video [...]

ADLINK Technology NuPRO-E330 System Host Board

Posted by Ken Cheung in Boards, Busses on Friday, July 30, 2010

ADLINK Technology introduced the NuPRO-E330 PICMG 1.3 full-sized System Host Board (SHB). The single board computer supports the Intel Core i7/i5/i3 processors at clocks speeds up to 3.33 GHz. The ADLINK NuPRO-E330 features dual-channel DDR3 1066/1333 MHz memory (up to 8GB in two DIMM slots), one PCI Express x16 and four PCI Express x1 (or [...]

If you found this page interesting:
Share/Bookmark

Older Posts »

 
Embedded Star Newsletter
Don't have time to visit Embedded Blog everyday? Then sign up for our free newsletter. We'll send you an email when we have something to share with you. Your email address will be kept confidential and we will not share, sell, or rent it to anyone. You can unsubscribe at any time by clicking a link in the email.

Enter your email address to sign up for our free newsletter:  

If you are familiar with RSS feeds, you can also sign up for our free blog feed. Our RSS feed is updated in real-time while our newsletter is updated daily.