WinSystems Debuts ISM-TRM-RELAY, ISM-TRM-COMBO Isolated Digital I/O Signal Conditioning Boards

WinSystems ISM-TRM-COMBO Octal Isolated In/Out/Relay Signaling Conditioning Module

WinSystems announced the ISM-TRM-RELAY and ISM-TRM-COMBO isolated digital signal conditioning and termination boards. The ISM-TRM-RELAY features sixteen independent, Single Pole Double Throw (SPDT) relays. The ISM-TRM-COMBO features eight optically isolated inputs, eight optically isolated outputs, and eight Form C relays on one board. The ISM-TRM-RELAY is priced at $299 and the ISM-TRM-COMBO is priced at $255.

The digital signal conditioning and termination boards work with small form factor embedded PC and I/O modules that use WinSystems’ WS16C48-compatible digital I/O controller connector pinout. They will also work with other manufacturers’ products. Both boards measure 3.6″ x 3.8″ (90mm x 96mm) and have the same mounting hole pattern as PC/104 modules. The ISM-TRM-RELAY and ISM-TRM-COMBO boards can be placed on the top or bottom of a PC/104 stack. These cards will also easily work with other computer form factors such as EPIC and EBX single board computers mounted on their PC/104 stack or as independent standalone signal conditioning modules.

WinSystems ISM-TRM-RELAY 16-Channel SPDT Relay Module

ISM-TRM-RELAY 16-Channel SPDT Relay Module

  • Small form factor industrial I/O termination board
  • 16-Channel Single Pole Double Throw (SPDT) Form C current relay output
  • Contact rating: up to 6A@250 VAC/24 VDC
  • Coil voltage: 5V nominal, 11V maximum
  • Dielectric strength: 4000 VAC for all relays
  • Surge strength: 6000V for all relays
  • 10 million life cycles mechanical life
  • Power: +5V required, 500 mA typical
  • Industrial operating temperature range: -40°C to 85°C
  • Dimensions: 3.6 x 3.8 inches (90 x 96 mm)
  • Weight: 4.6 oz (130g)
  • LEDs provide visual status of each relay
  • Ribbon cabling directly compatible with WinSystems’ single board computers (SBC) and individual I/O modules
  • Pluggable quick disconnect terminal block connectors for field wiring
  • Custom OEM configuration with optically isolated input and/or output available
  • RoHS compliant

ISM-TRM-COMBO Octal Isolated In/Out/Relay Signaling Conditioning Module

  • Small form factor industrial I/O termination board
  • Custom configurations available for OEMs
  • Pluggable quick disconnect terminal block connectors for field wiring
  • Ribbon cabling directly compatible with WinSystems’ single board computers (SBC) and individual I/O modules
  • RoHS compliant
  • Eight SPDT Form C medium current relays with contacts rated up to 6A @ 250 VAC / 24 VDC
  • LEDs provide visual status of each relay
  • Eight optically isolated and debounced inputs with a voltage range from 5 to 30 volts AC and DC
  • Eight optically isolated outputs with Open-Collector Darlington drivers that sink 500 mA from 5 to 30 VDC
  • Power: +5V required, 250 mA typical
  • Industrial operating temperature range: -40°C to 85°C
  • Dimensions: 3.6 x 3.8 inches (90 x 96 mm)
  • Weight: 3.3 oz (92g)

More info: WinSystems