Ronetix PM9G45 CPU Module

Ronetix introduced the PM9G45 computer-on-module. The SODIMM-sized CPU module features the Atmel’s ARM926-based AT91SAM9G45 system-on-chip (SoC), 128MB DDR2, 256MB NAND Flash, 10/100Mbps Ethernet MAC controller, USB Host and On-The-Go ports, four USART interfaces, dual high-speed multi media card interfaces. The PM9G45 have a touch screen controller and a LCD controller that supports resolutions up to 800×600 pixels. The SODIMM-sized board measures only 2.6 by 1.3 inches (67x35mm). The Ronetix PM9G45 is ideal for industrial control systems, data loggers, point-of-sale (PoS) terminals, alarm systems, medical equipment and other embedded systems. The Ronetix PM9G45 CPU module is available now.

Ronetix PM9G45 computer-on-module

RONETIX PM9G45 CoM Highlights

  • AT91SAM9G45 (optional AT91SAM9M10), 400 MHz ARM926EJ-STM ARM Thumb processor
  • 32 KB Data Cache, 32 KB Instruction Cache, MMU
  • 10/100 MBit/s Ethernet MAC Controller
  • SO-DIMM 200 JEDEC MO-224 module (67×35.5mm)
  • 128MiB DDR2 SDRAM, 16-bit
  • 256MB NAND Flash
  • 8 MB Atmel Serial DataFlash (optional)
  • Serial number chip DS2401 (optional)
  • Power: 3,3V; 600mW typical consumption
  • Operating temperature: commercial and industrial -40° +85°C
  • Dimensions: 2.6 x 1,3 inches (67 x 35mm) , SODIMM200 connector
  • Operating systems: Linux 2.6.30; Windows CE 6.0

SODIMM connector Features

  • High speed USB 2.0 OTG (Host and Device)
  • USB 2.0 Full speed Host
  • 4x USARTs
  • 4 x IO Controllers
  • 2 x High Speed Memory Card Hosts (SDIO, SD/MMC Card)
  • 2 x Wire interfaces I2C
  • 2 x Three-channel 16-bit Timer/Counters
  • 2 x Synchronous Serial Controllers (I2S mode)
  • 2 x Master/Slave Serial Peripheral Interfaces (SPI)
  • Image Sensor Interface (ISI)
  • LCD Interface
  • Four-channel 16-bit PWM Controller
  • JTAG Interface
  • 8-channel 10-bit ADC with 4-wire Touch Screen support
  • Digital audio (AC97/I2S)

More information: Ronetix PM9G45 CPS Module (pdf)