Acromag IP560 and IOS-560 CAN Bus Modules for Embedded Systems
Acromag introduced the IP560 and IOS-560 CAN bus modules for interfacing network sensors and actuators to control systems. The IP560 is an Industry Pack ANSI/VITA-4 card that plugs into VME, CompactPCI, and PCI bus mezzanine carrier cards or single-board computers in embedded systems. IOS-560 is designed for use within Acromag’s I/O Server industrial PC, which is a small fanless box computer for mobile computing, machine control, and test applications. Both CAN bus interface modules feature two channels with optional isolation. Each channel has an NXP SJA1000 CAN controller with a TJA1041 transceiver. Extended temperature models support -40 to 85°C operation. Single quantity pricing starts at $500.
Acromag IP560 and IOS-560 CAN Bus Modules Features
- Two complete CAN bus interfaces
- NXP SJA1000 CAN bus controller with high-speed TJA1041 CAN transceiver
- 1000V isolation, channel-to-channel and channel-to-host (IP560-i models)
- ISO 11898 compliance for Part A (11-bit) and Part B extended (29-bit) arbitration IDs
- CAN 2.0B protocol compatibility (extended frame passive in PCA82C200 compatibility mode)
- Data rates of up to 1Mb/s
- Supports both 8MHz and 32MHz IP operation
- -40 to 85°C operating temperature range
- TXD dominant clamping handler with diagnosis
- RXD recessive clamping handler with diagnosis
- TXD-to-RXD short-circuit handler with diagnosis
- Bus line short-circuit diagnosis
- Bus dominant clamping diagnosis
- PCA82C200 mode (BasicCAN mode is default)
- Extended receive buffer (64-byte FIFO)
- 24 MHz clock frequency
- Undervoltage detection on VBAT
- Listen-only mode for node diagnosis and failure containment
More information: Acromag
If you are familiar with RSS feeds, you can also sign up for our free blog feed. Our RSS feed is updated in real-time while our newsletter is updated daily.