Radiocrafts RC1180-KNX1 KNX-RF Module
Radiocrafts introduced the RC1180-KNX1 compact module. The RC1180-KNX1 board complies with the KNX-RF (Konnex over RF) specification. KNX is the only open international standard for home and building control. The embedded protocol supports KNX-RF 1.1 and KNX Ready, and can be used for unidirectional and bidirectional devices, also in battery operated systems. It conforms to EN 50090 (ISO/IEC 14543-3). KNX is ideal for smart home, building automation, and building management systems. The RC1180-KNX1 module and demo kits are available now.
Radiocrafts RC1180-KNX1 KNX-RF Module Highlights
- Smallest available in the market
- Measures only 12.7 x 25.4 x 3.3 mm
- Designed for home and building automation systems
- Operates in the 868 MHz band
- Uses Listen Before Talk (LBT) to reduce collisions
- One receiver can be linked with up to 64 transmitters — enabling very large RF networks
- Can be used with S, A and E modes of installation
- Automatic battery supervision and signal strength information
- Includes RF repeaters and media couplers
- Surface-mounted transceiver module
- Can easily be integrated into any sensor or actuator
- UART interface for serial communication and configuration
- Antenna is connected directly to the RF pin
- Certified for operation under the European radio regulations for license-free use
- Line-of-sight range of 800 meter when used with quarter-wave antennas
More information: Radiocrafts
If you are familiar with RSS feeds, you can also sign up for our free blog feed. Our RSS feed is updated in real-time while our newsletter is updated daily.
