Embest MBC-SAM9G45 Core Board

The Embest MBC-SAM9G45 is an ARM9 module board built with the ATMEL AT91SAM9G45 embedded microprocessor. The Embest MBC-SAM9G45 features 4MB DataFlash, 256MB NandFlash, 64KB EEPROM, and 128MB DDR2 SDRAM. The board provides a wide range of peripherals, including a high-speed USB host/device port, an Ethernet 10/100 interface, two high-speed SD/MMC slots and a QVGA 320×240 LCD panel with Resistive touch screen. It measuring only 45mm x 52mm and supports Linux 2.6 and WinCE 6.0.

Embest MBC-SAM9G45 ARM9 module board with ATMEL AT91SAM9G45 embedded microprocessor

Embest MBC-SAM9G45 Core Board Features

  • Atmel AT91SAM9G45 ( based on ARM926EJ-S Core)Processor
  • 2 KBytes Data Cache, 32 KBytes Instruction Cache, with MMU
  • Runs up to 400MHz
  • Internal memory: one 64KB ROM and one 64KB SRAM
  • External memory: 4MB DataFlash, 256MB NandFlash, 64KB EEPROM and 128MB DDR2 SDRAM
  • One Micro USB connector
  • One RS232 Serial Port
  • OS: Preinstalled Linux2.6, support WinCE6.0 (BSP, optional)
  • Power supply: 5V
  • Temperature range: -20 to +70 Celsius
  • The module is led out most signals of Atmel AT91SAM9G45, like UART, Ethernet, LCD, Touch Screen, USB Host, USB Device, ADC, DAC, SPI, SDIO, GPIO
  • Board size: 45mm x 52mm x 11mm (Length * Width * Thickness)
  • Interface type: QSH-060-01-X-D-A
  • Connector size: 42.3mm x 8.6mm x 0.5mm (Length x Width x Thickness)
  • Connector gap: 0.5mm
  • Pins: 120
  • Board layers: 8
  • Power supply: 5V DC or powered by base board
  • Weight: 15.2g

More info: Embest