e-con Systems eSOM300 Computer-on-Module
e-con Systems introduced the eSOM300 Computer-on-Module. The eSOM300 is based on Marvell’s PXA300 processor. The eSOM module is ideal for embedded systems applications, such as point of sale, handheld and mobile terminals, vehicle mount systems, test and measurement equipment, kiosks, and gaming machines. eSOM300 modules support Windows CE 6.0 R3 and Linux 2.6.x operating systems. The eSOM300 module will be available for sale on April 15th, 2010.
eSOM300 Computer-on-Module Features
- XScale PXA300 @ 208/624 MHz
- 2D graphics controller
- 64/128/256 MB Mobile DDR SDRAM
- 128/512/1GB NAND Flash
- 100Mbit Ethernet
- RTC
- Battery charger
- Serial ports, USB ports, audio, GPIO lines
- Local bus expansion header
- Processor running at 208/624 MHz speed
- Higher memory bandwidth
- Support for flash up to 1GB
- Support for RAM up to 256MB
- USB 2.0 device support
- 2D Graphics acceleration support
- Battery charger support (optional)
- 10/100 Ethernet Controller with PHY (optional)
- AC97 Audio Codec with touch screen support on the module (optional)
- Real Time Clock (optional)
- Power Management IC
- SODIMM 204 pin socket
- Operating temperature: -25 degrees to +85° C
- Power: 20 mW @ sleep mode and 2W at full running mode
- Module Dimensions: 67.6mm x 41mm
- Availability – Until December 2015 (minimum)
More info: e-con Systems
Embedded Star Newsletter
Don't have time to visit Embedded Blog everyday? Then sign up for our free newsletter. We'll send you an email when we have something to share with you. Your email address will be kept confidential and we will not share, sell, or rent it to anyone. You can unsubscribe at any time by clicking a link in the email.
If you are familiar with RSS feeds, you can also sign up for our free blog feed. Our RSS feed is updated in real-time while our newsletter is updated daily.