Technosoft ISD860 Intelligent Servo Drive

The Technosoft ISD860 intelligent servo drive for motion applications that need cost-optimized design, embedded intelligence, networking, and high servo performance control. It features MotionChip DSP technology. The ISD860 controls brushless, DC or linear motors up to 860 W continuous / 2.2 kW peak voltage. ISD860 works in single-axis, multi-axis or stand alone configurations. The embedded Technosoft Motion Language includes a high-level command protocol, which can be used by the host through the on-board RS232 / CAN serial interfaces.

Technosoft ISD860 Intelligent Servo Drive

Technosoft ISD860 Intelligent Servo Drive Features

  • Fully digital servo amplifier with embedded motion controller
  • Controls brushless (sinusoidal / trapezoidal), DC brush, or linear motors
  • Single-axis, operating in stand-alone or slave mode (distributed intelligence)
  • Control modes: position, speed, or torque
  • Motion modes: S-curve profiles, 1st / 3rd order PT/PVT interpolation, electronic gearing and electronic camming
  • External reference: analog or digital (2nd encoder, or pulse and direction)
  • Powerful TML instruction set including: motion commands, program flow control, I/O handling, arithmetic and logic operations, remote control from another drive
  • Axis synchronization between all drives
  • Output current: 20 A (ISD720 model) or 12 A (ISD860 model) continuous; 49.5 A peak (ISD720) or 31 A peak (ISD860)
  • Supply voltage: 12-36 V for logic; 12-36 V (ISD720) or 12-72 V (ISD860) for motor
  • Open-frame design (136 x 84 x 26) mm
  • DSP controller based on the Technosoft MotionChipTM technology
  • 10-bit PWM at 20 KHz
  • RS-232 serial communication, up to 115 k baud rate
  • CAN bus 2.0B with TMLCAN or CANopen protocols, up to 1 Mbit/s
  • Operation in multiple-axis structures, via CAN communication channels

More information: Technosoft