ZMDI ZIOL2401 IO-Link High Voltage Line Driver

ZMDI announced the ZIOL2401 high-voltage line driver with IO-Link functionality. The ZIOL2401 chip offers two independent I/O-channels that meet the physical layer requirements of sensor and actuator systems used in factory automation applications. The ZIOL2401 combines an advanced two-channel IO-Link driver with a DC-DC converter capable of producing up to 15 Volts. This can power external sensors, as well as the ZIOL2401, and saves space and cost in board designs. Unit prices start at EUR 3.50 (US$ 5.00) in volumes of 1000 devices or more. The ZIOL2401 is begin volume production in Q2 of 2010. Samples are available now.

The ZMDI ZIOL2401 high-voltage IO-Link line driver provides a wide range of configurable system features. An adjustable output slew rate allows engineers to achieve excellent EMC behavior. The maximum current driven by the output stages can be set to a value that best fits the developer’s application. All configuration parameters are stored in an on-chip EEPROM and automatically loaded during power up. The ZIOL2401 reports all status information, such as an overload condition or over-temperature. An SPI interface supports the access to configuration and status registers.

The ZIOL2401 device supports standard I/O and works with both 3.3V and 5V systems. It also offers wake-up detection and fast direct event signalling. The EEPROM read/write functionality is guaranteed across the entire operating temperature range in combination with a low core voltage supply of 3.3V. The integrated DC/DC converter has an adjustable output voltage from 3V to 15V to provide power for the application circuit. The CMOS mixed signal technology supports supply voltages up to 36V.

The IO-Link drivers are fully programmable, including slew rate and current limitation, and offer complete diagnostics as well as over temperature protection. Operating temperature is -25 degrees C and +85 degrees C. The IC comes in a space saving 4mm x 4mm QFN24 package. An exposed die paddle ensures optimum heat distribution.

The application kit includes an evaluation board and a Windows-based configuration tool, with a USB interface between the PC and the board. Developers can easily evaluate configurations and save the results. In-system programming via SPI is also supported, allowing full customization after manufacturing.

IO-Link is an open standard used in factory automation for linking sensors and actuators, and works with all types of factory data buses. IO-Link serves the growing need for faster, smarter communications that are compatible with the harsh factory environment while remaining cost-effective. IO-Link provides a point-to-point connection between a sensor or actuator and the system that controls it. The flexible field-bus-independent solution is extremely easy to install and allows existing sensor networks to be quickly upgraded.

More information: ZMDI