The MEN Micro F19P is a 3U Intel-based single board computer (SBC) that conforms to the new PICMG 2.30 CompactPCI PlusIO standard. The F19P adheres to the CompactPCI (PICMG 2.0) standard while providing a migration path to the new serial CompactPCI Plus standard (PICMG CPLUS.0) to enable the board’s use in CompactPCI-only systems and in hybrid systems using both CompactPCI and CompactPCI Plus. Pricing for the F19P starts at $1,413 in single quantities (Celeron M 722).
F19P 3U CompactPCI PlusIO Intel Core 2 Duo SBC Features
- Intel Core 2 Duo SP9300, 2.26 GHz
- Dual-core 64-bit processor
- 4 HP system master or stand-alone
- 32-bit CompactPCI and PICMG 2.30 PlusIO
- Up to 4 (8) GB DDR3 DRAM soldered
- CompactFlash and microSD card slots
- Standard front I/O: VGA, 2 Gb Ethernet, 2 USB
- Standard rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gb Ethernet
- Other I/O (onboard, side card): SATA, SDVO, HD audio, USB, UART etc.
- Board controller
Available with a range of Intel processors, from the 2.26 GHz Core 2 Duo SP9300 to the 1.20 GHz Celeron M 722, and dissipating between 5.5 Watts and 25 Watts, the 32-bit/33-MHz SBC was especially developed for numerous low power embedded applications with high performance and reliability requirements.
An integrated graphics controller on the Intel GS45 Express Chipset makes the F19P ideal for applications needing not only high graphics performance, but also for monitoring or control as well as test and measurement. The F19P’s specially developed heat sink and soldered components meet shock and vibration requirements to enable the board’s use in mobile applications.
The F19P board includes four USB 2.0 ports, four fast SATA/SAS ports, four PCI Express x1 links, and one Gigabit Ethernet port via the J2 rear I/O connector. In addition, the F19P supports seven PCI Express x1 links for fast communication: three for onboard Ethernet and four x1 links, or one x4 link via the rear I/O or a special side card.
More information: MEN Micro