Oki Electric Industry Co., Ltd. (TOKYO:6703) recently announced the ML610Q431/Q432 8-bit flash microcontroller. The MCU incorporates 1.1V flash memory based on OKI’s proprietary low-power technology and a fine power-management function. The ML610Q431/Q432 has one of the lowest power operation in the industry. The ML610Q431/Q432 includes a highly efficient RISC-type CPU, an LCD driver, two types of A/D converters, and on-chip debugging functions. It is ideal for handheld devices with LCDs such as watches, thermometers, and pedometers as they become smaller and require shorter time-to-market. Volume shipment is expected to start this month.
- Built-in flash memory
- Detailed power-management function
- Highly efficient RISC-type CPU
- LCD driver
- Two types of A/D converter
- On-chip debugging
Based on OKI’s proprietary low-power technology, the ML610Q431/Q432 operates over a wide range of voltage (from a low 1.1V to 3.6V), and achieves a current consumption that is equivalent to MCUs with built-in mask ROM. Therefore, while keeping the advantage of flash memory MCU’s short development and manufacturing time, the ML610Q431/Q432 can simultaneously enable use of smaller and lighter batteries because of its low power consumption.
The ML610Q431/Q432 includes three power-management functions: HALT mode, STOP mode and triple clock mode. HALT mode suspends CPU operation and STOP mode suspends peripheral circuit operations in addition to CPU operation. The ML610Q431/Q432 can keep the power low even when CPU is operating because it has triple clocks and users can select a clock from among the frequencies of 32.768kHz, 500kHz, or 4.096MHz. In addition, low power consumption enables longer battery life and contributes to smaller battery, resulting in smaller and lighter devices.
The ML610Q431/Q432 uses OKI’s proprietary CPU, “nX-U8/100,” based on RISC architecture, which is well-established in the market, having shipped a total of 60 million units. The CPU can offer high performance while requiring only low power because it executes most instructions in a single machine cycle with the three-stage pipeline and has a bit operation instruction, which enables high-speed access to the memory, and a multiplication/division instruction.
ML610Q432 offers 1536 dot (64 seg×24 com) resolution while ML610Q431 offers 1024 dot (64 seg×16 com) resolution, both including a charge pump circuit. Because no external driver is required, it enables smaller devices.
The ML610Q431/Q432 includes two types of A/D converters: a 24-bit RC oscillator type and a 12-bit successive approximation type. It can make various measurements by connecting it to a thermohygrometer sensor that changes resistance and capacitance, or a pressure sensor that changes output voltage. Because no external A/D converter is required, it enables smaller devices.
On-chip debugging emulator (product name: uEASE), helps reduce development time for the device. It enables users to debug software programs and erase or write them into the flash memory when mounted on the users’ circuit board.
More info: Oki Electric Industry