Elma Electronic AMC Load Board
Elma Electronic's Advanced Mezzanine Card (AMC) Load Board is designed for testing the cooling and power of MicroTCA systems. The AMC Load Board is compliant to the MicroTCA.0 and AMC.0 Advanced Mezzanine Card specifications. The unit comes standard in the single module/full size with options for double modules and compact or mid-sizes. Hot-swap pluggable, the board incorporates a JTAG interface and IPMI support.
The load board is configurable to seven wattages: 0W, 20W, 30W, 40W, 50W, 60W and 70W. Six LEDs on the front panel indicate which power level is activated. Custom wattages and access management is available upon request. The power level can be changed by repeatedly pressing the front panel button, cycling through all power levels. In addition, the power is controlled using IPMI commands (Set_FRU_LED_State/Get_FRU_LED_State) allowing each level to be controlled independently. The blink mode is also supported to set a dynamic load.
The load board has 3 temperature sensors (one on the bottom and two on the top). These are implemented as IPMI temperature sensors and could be read through the MicroTCA Carrier Hub (MCH). The unit also features redundant operation with automatic switchover. The lead-time is 4-6 weeks.
More info: Elma Electronic »
If you found this page useful, bookmark and share it on:
Possibly of Interest
- GE Fanuc Embedded Systems MicroTCA MP-2000, MicroTCA MP-3000 Platforms
- Kontron AM4010 AdvancedMC Module
- Kontron CP6014 CompactPCI Processor Board
- Concurrent CompactPCI Dual PMC SBC with Intel Core 2 Duo
- GE Fanuc V7768 and V7769 6U VMEbus SBCs
If you are familiar with RSS feeds, you can also sign up for our free blog feed. Our RSS feed is updated in real-time while our newsletter is updated daily.
