IBM, Chartered, Samsung Team on 45nm DFM for Common Platform
As the Common Platform(TM) technology alliance, IBM, Chartered Semiconductor Manufacturing and Samsung Electronics, Co., Ltd. announced the availability of design-for-manufacturing (DFM) technology models, data files and design kits from leading EDA and DFM companies, supporting Common Platform technology at 45 nanometer (nm). This is the second node, following 65nm, where the alliance partners have driven comprehensive DFM solutions, which marry technology and tool support from leading EDA and DFM suppliers with manufacturing data and models from the Common Platform technology foundries to help ensure the success of chip designs at this advanced technology node across all three manufacturers’ fabs.
Telelogic Confirms Takeover Proposal
In response to recent market speculation, and after consultation with the Nordic Exchange Stockholm, the Board of Directors of Telelogic AB (Nordic Exchange Stockholm/MidCap/TLOG) confirms that it has received a conditional takeover proposal for all the issued and outstanding shares in the company at SEK 21 per share in cash. However, there can be no assurance that this will result in a transaction.
TI Introduces First Floating Point Digital Signal Controller
Helping industrial control designers increase energy efficiency and system performance, Texas Instruments Incorporated (TI) (NYSE: TXN) announced the industry’s first floating point digital signal controllers (DSCs). The new TMS320F2833x devices provide 300 million floating point instructions per second (MFLOPS) performance at 150 MHz while providing the lower costs typically associated with fixed point processors. Simplified software development common to floating-point processors and the performance boost allows solar power inverters to more efficiently convert energy from photovoltaic (PV) panels, offers better power efficiency and performance to variable speed alternating current (AC) drives and provides greater performance for automotive radar applications.
CAST Unveils Free Simulation Model of PCI Express IP Core
Semiconductor intellectual property (IP) provider CAST, Inc. announced a new downloadable free simulation model of its PCI Express IP core, and revealed details of a DAC demonstration and promotion for its APS 32-bit processor cores.
Ramtron Launches First Non-Volatile State Savers
Ramtron International Corporation (Nasdaq: RMTR), a leading developer and supplier of non-volatile ferroelectric random access memory (FRAM) and integrated semiconductor products, launched the semiconductor industry’s first non-volatile state saver â€“ a novel device that saves the state of signals on demand and restores them to the correct state automatically upon power up. FRAM technology uniquely enables this capability due to its fast write time and virtually unlimited write endurance.
MathWorks Announces Simulink Design Verifier for Test Generation
The MathWorks introduced Simulink(R) Design Verifier, which generates tests and proves design properties for Simulink(R) and Stateflow(R) models using the Prover(R) Plug-In from Prover Technology. Developers of embedded systemsâ€”especially complex or safety-critical systemsâ€”can now automatically obtain test cases to satisfy industry-standard metrics, such as modified condition/decision coverage (MC/DC), while uncovering design errors earlier in the development process when they are significantly less expensive to fix.
MontaVista Supports Freescale’s MPC8349E-mITXE Platform
MontaVista(R) Software, Inc., the leading provider of Linux(R) for intelligent devices and communications infrastructure, announced its support for Freescale Semiconductor’s MPC8349E-mITXE platform. This platform is ideal for hardware and software development for the tightly integrated PowerQUICC(R) II Pro processor and its ability to leverage a cost-effective mix of on-chip and external components. By increasing peripheral support, MontaVista has created a more realistic development environment. The collaborative solution accelerates the performance of richer, more tightly integrated embedded applications and provides customers with faster time to market.
Lattice Adds Support for HyperTransport, Memory Interfaces
Lattice Semiconductor Corporation (NASDAQ: LSCC) announced industry-leading FPGA support and performance for HyperTransport(TM) technology and three popular memory interfaces. The LatticeSC(TM) and LatticeSCM(TM) FPGA families (collectively, the “LatticeSC/M” families) now support HyperTransport technology at rates up to 1600Mbps, QDRII+ rates up to 750Mbps, RLDRAM(R) II rates of 800Mbps and DDR2 interface speeds of 667Mbps. HyperTransport technology and the memory interfaces are implemented using the LatticeSC/M families’ innovative PURESPEED(TM) I/O technology. The memory controller IP (intellectual property) is implemented in Lattice’s unique and low power Masked Array for Cost Optimization (MACO(TM)) structured ASIC technology.
CoWare, AXE, BeatCraft Integrate Virtual Platform, axLinux, JAKAR
CoWare(R), Inc., AXE, Inc., and BeatCraft, Inc. announced that the AXE axLinux and BeatCraft JAKAR Media Framework have been integrated with the CoWare Virtual Platform. CoWare is the leading supplier of platform-driven electronic system-level (ESL) software and services. AXE, Inc. is a supplier of software products and development services for developers of mobile and home appliance devices, and BeatCraft, Inc. is a supplier of Linux and Windows software solutions focused on embedded software for audio and video processing.
Synplicity, Xilinx Target Area, Power Reductions with 65nm FPGA
In their ongoing commitment to provide push button flows in 65-nanometer (nm) FPGA design, Synplicity, Inc. (NASDAQ: SYNP), a leading supplier of software for the design and verification of semiconductors, and Xilinx, Inc. (NASDAQ: XLNX), the world’s leading supplier of programmable logic solutions, announced an extension of their Ultra High-Capacity Joint Task Force activities to address area utilization and lowering power consumption.
EMA Design Automation Releases TimingDesigner 9
EMA Design Automation(TM), a full-service provider of Electronic Design Automation (EDA) solutions, announced the release of TimingDesigner(R) 9.0 featuring Design Kits with assembled diagrams and libraries for commonly used parts and interface protocol standards, and program modifications to accommodate the latest features of the newest operating systems. “Since acquiring TimingDesigner a short time ago, our design team has been working diligently to add value to benefit our customers,” said Manny Marcano, President and CEO of EMA.
ProDesign Rolls Out CHIPit Platinum V5 for SIC, SoC Prototyping
ProDesign, leading supplier of high-speed ASIC and SoC verification platforms, announced the launch of the CHIPit Platinum V5. The new CHIPit Platinum features an enhanced system architecture based on largest Xilinx Virtex-5 LX330 FPGAs, further enhanced debugging features and completely new software for an easier design implementation, than ever before.
TTAutomotive Debuts Fujitsu MB91F465XA CPU Board with FlexRay Controller
TTAutomotive, TTTech’s subsidiary for FlexRay(TM) solutions, has released in cooperation with Fujitsu Microelectronics Europe (FME) a new CPU board based on Fujitsu’s MB91F465XA with an integrated FlexRay communication controller for its modular TTXPowerlink product family. The combination of Fujitsu’s latest FlexRay microcontroller unit and TTXPowerlink’s modular concept provides a flexible and effective solution for FlexRay applications in the automotive industry.
Nextreaming Launches Camcorder Solution for LoCosto Powered Handsets
Nextreaming, the leading provider of embedded multimedia software solutions for handset manufacturers, had successfully launched multimedia solutions for the “LoCosto” family by Texas Instruments, and deployed handsets using the “LoCosto” solution in the mass-phone market. With this successful deployment, Nextreaming holds firm grip as one of the first providers of camcording solution for the “LoCosto” platform with other multimedia solutions.
FS2 System Navigator Probe Supports Ultra Low Power Handshake
First Silicon Solutions (FS2), a division of MIPS Technologies, Inc. (NASDAQ: MIPS), announced a complete tool suite supporting Handshake Solutions’ HT80C51 and HT80C51MX (Memory eXtension) cores. The tool suite, based on FS2′s unique On-chip Instrumentation (OCI(R)) debug core technology is able to recognize and respond to the “handshake”-based system of requests and acknowledgements used when the processor interacts with the various devices in the system. This makes FS2′s System Navigator probe and debug software perfect for low power designs and devices involving contactless smart cards and wireless radio ID.
EVE Ships ZeBu Hardware-Assisted Verification for Multimedia SoC Design
EVE of San Jose, Calif., began shipping the newest member of a growing vertical applications/market solutions offering of its ZeBu (for zero bugs) hardware-assisted verification family that serves the multimedia design community. EVE’s broad selection of hardware-assisted verification solutions including acceleration, fast emulation and prototyping will be demonstrated during the 44th Design Automation Conference (DAC) through Thursday at the San Diego Convention Center here in Booth #4060.
CAST Introduces Latest JPEG 2000 Encoder IP Core
Semiconductor intellectual property (IP) provider CAST, Inc. announced a new version of its successful JPEG 2000 Encoder Core. The new version is faster, requires no external processing, adds significant features, and is customizable and highly scalable. It will ship next quarter (Q307).
Microchip Technology Launches Online Lighting Applications Design Center
Microchip Technology Inc., a leading provider of microcontroller and analog semiconductors, announced an online Lighting Applications Design Center. This comprehensive Web site provides a wide range of technical tools and resources that designers can use to add intelligence to lighting designs-all in one, easy-to-reach place. Designers have full access to Microchip application notes and product information from the design center, including information related to its PIC(R) microcontrollers, dsPIC(R) Digital Signal Controllers (DSCs), analog and memory products, as well as development tools, and how they can be used to enhance the performance and efficiency of lighting applications.
Fab Owners Association Forms FOA Purchasing Partners
The Fab Owners Association (FOA), the association of semiconductor / MEMS manufacturing executives and suppliers, has announced the formation of a semiconductor Group Purchasing Organization (GPO), to be called FOA Purchasing Partners, Inc.(PPI). PPI will be the official group purchasing organization of the FOA and its device maker members, providing procurement services, including aggregation of demand, contract negotiations and contract management for semiconductor manufacturing consumables. L.T. Guttadauro, FOA Executive Director will also serve as President of PPI.