Ronetix Debuts PEEDI High Speed, Low Cost JTAG Emulator for ARM7, ARM9
7/5/2005 - Ronetix announced the availability of a high speed, low cost JTAG Emulator for ARM7 and ARM9 based micro controllers. PEEDI (Powerful Embedded Ethernet Interface) supports native GNU gdb and provides a very high real download speed - more than 400Kbytes/s. It has a built-in telnet interface for simple debugging and target flash programming. The built-in fast Flash Programmer supports over 750 Flash devices.
Ronetix offers also a starter kit for rapid starting with an ARM7 based platform. The Starter Kit consists of PEEDI, EB55800 (evaluation board with Atmel AT91M55800A) and a CD with GNU toolchain for Linux and Windows, eCos examples.
PEEDI is available now from Ronetix for 1590 EUR and the Starter Kit for 1720 EUR. For further information visit www.ronetix.at
Advantages
- Very high real download speed - more that 400Kbytes/s.
- 5kHz - 33MHz JTAG clock using 25cm standard cable.
- Target Voltage 1.2V - 5V.
- Built-in support for gdb (remote target via Ethernet).
- Built-in telnet command line interface.
- Built-in very fast Flash programmer that supports over 750 Flash devices.
- Can be used as a standalone Flash Programmer, up to 9 images stored on MMC/SD card controlled by front panel interface.
- Small robust aluminum case.
About Ronetix
onetix is a company specializing in JTAG emulation tools and debugger for ARM7 and ARM9 based MCUs. The company supplies complete software toolkits, intelligent debug probes and development boards for the ARM7 and ARM9 technology implementations. The Company headquarters is in Vienna, Austria. For sales information on Ronetix's products contact sales@ronetix.at
Previous Page | News by Category | News Search
If you found this page useful, bookmark and share it on:
If you are familiar with RSS feeds, you can also sign up for our free blog feed. Our RSS feed is updated in real-time while our newsletter is updated daily.
